POWER TRAIN
6 liter OHV V-8, turbo diesel engine
Dual 150 amp alternators
Dual 750 amp batteries with run down
protection
Engine block heater
TorqShift 5-speed electronic automatic transmission
Limited slip differential
4.88 axle ratio
40 gallon fuel tank
Stainless steel exhaust
ACCESSORIES
Chrome Real Wheel simulators
Westin stainless cab steps
Aluminum rub rails on body
Diamond plate trim on rear of body
COMFORT AND CONVENIENCE
Heater/defroster & Air Conditioning
Premium AM/FM CD Radio with clock
Cruise control with steering wheel controls
Power door locks
Analog instrument display includes:
Tachometer, oil pressure gauge,
Water temperature gauge,
Volt gauge and trip odometer
Warning indicators include:
Oil pressure, water temperature,
Battery, key in ignition,
Low fuel and door ajar
Steering wheel with tilt adjustment
Power front windows with tint,
driver one-touch down
Fixed interval front windshield wipers,
sun visor strip
Dual vanity mirrors
Day-night rearview mirror
Interior lights including front reading lights
COMPARTMENTS
Left Side
One (1) compartment ahead of the left side rear wheels, approximately 54" wide x 55" high x 23.50" deep. The door opening is approximately 31" wide x 50" high. This front compartment shall also transverse to the right.
One (1) compartment over the left side rear wheels, approximately 42" wide x 38" high x 23.50" deep. The door opening is approximately 39" wide x 33" high.
One (1) compartment behind the right side rear wheels, approximately 29” wide x 55” high and 23.5” deep. The door opening is approximately 26” wider x 50” high.
Right Side – same compartment dimensions as left side.
The rear center compartment shall be approximately 46” wide x 82” deep
BODY CONSTRUCTION
The body is fabricated using Polyprene, a specially formulated high strength, copolymer material, providing a durable, impact resistant, corrosion resistant, and lightweight body. The body is fabricated using Polyprene extruded sheets. Sheet thicknesses shall be 3/8", 1/2" and 3/4". All seams shall be welded pursuant to ASTM Standards. All outside corners on body shall have a minimum 1/4" radius. The entire body is a welded one piece module, assembled and painted prior to mounting on the sub frame and the chassis.
The exterior wall will exhibit an optional 400” radius to give the unit cosmetic appeal and comport to the radius of the truck cab.
STOP, TURN, BACK-UP LIGHTS
Whelen 600 series lights in Whelen CAST3 polished triple lamp bezels-one on each side of lower rear body corners.
Tail lights are installed in following descending order:
TOP – Red LED Stop/Tail Light
CENTER – Amber LED Arrow Turn Signals
BOTTOM – Clear lens LED maximum intensity back-up
Selling Price $91,000.00 For demonstration
Please call 864-269-2131 Or 800-327-8394 |
